Sennheiser ME66:

The ME 66 is a shotgun microphone head designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up direction. Matt black, anodised, scratch-resistant finish.

Sennheiser ME66 Features:

• Super-cardioid/lobar pick-up pattern
• Highly directional
• Low inherent self-noise
• High sensitivity
• Wide frequency response

Sennheiser ME66 Specifications:

• Dimensions: 22,5 x 221 mm
• Frequency response (microphone): 40 – 20000 Hz +- 2,5 dB
• Sensitivity in free field, no load (1kHz): 50 mV/Pa +- 2,5 dB
• Nominal impedance: 200 (K6)
• Min. terminating impedance: 1000 (K6)
• Equivalent noise level: 10 dB
• Equivalent noise level weighted as per CCIR 468-3: 21 dB
• Maximum sound pressure level (passiv): 125 dB / 1 kHz (K = 1%)

Sennheiser K6:

The K6 powering module is the heart of this Sennheiser professional modular microphone system and can be powered either by its internal ‘AA’ size 1.5 V battery or by 12 – 48 V phantom power. The K6 can be combined with different condenser microphone heads to provide a wide variety of polar patterns. Matt black, anodised scratch-resistant finish.

Sennheiser K6 Features:

• Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
• On/off switch with battery test
• High output, low noise
• Transformerless balanced output on 3-pin XLR connector

IN THE BOX:

• 1 K6 powering module
• 1 MZQ 200 microphone clamp
• 1 AA battery
• 1 protective carrying case

Sennheiser K6 Specifications:

• Dimensions: d 22 x 94 mm (netto)
• Frequency response (microphone): 30 – 20000 Hz +- 1 dB
• Transducer principle (Microphone): Pre-polarised condenser microphone
• Weight: ca. 45 g
• Nominal impedance: 200
• Min. terminating impedance: 1000 Ohm Phantom
• Operating time: max. 150 h
• Gain: 0 dB
• Current consumption: 2,2 mA
• Output voltage: 2 V Phantom
• Battery Specification: 12 – 48 V 1x Typ IEC LR 06 Phantom

Made in Germany