Audix ADX 10 FLP Condenser Microphone Overview:

The ADX10FLP is characterized with a uniformly controlled cardioid polar pattern, helping to isolate the area or section being miked from other instruments or vocals on stage. With a smooth and accurate frequency range of 50 Hz – 18 kHz, the ADX10FLP is lightweight, low profile and will provide natural sound with exceptional transient response.

The ADX10FLP cardioid condenser microphone works with the Audix wireless systems specifically for use with a flute, includes a clip that attaches to the headstock of a flute, an 8′ cable terminating to a miniXLRf connector. Requires a phantom power adapter (APS911).

Manufactured to high standards and tight tolerances, the ADX10FLP miniaturized condenser flute microphone features a modular threaded capsule, machined brass body with matte black finish, high quality shielded microphone cable and a variety of optional accessories.

Features:

• Miniature condenser flute microphone
• Natural, accurate sound reproduction
• May be used wired or with Audix wireless systems
• Designed, assembled & tested in the USA

Specifications:

• Transducer Type: Pre-Polarized Condenser
• Frequency Response: 50 Hz – 18 kHz
• Polar Pattern: Cardioid
• Output Impedance: 250 ohms
• Sensitivity: 4.5 mV / Pa @ 1k
• Equivalent Noise Level: <29 dB (A-weighted)
• Signal to Noise Ratio: >65 dB
• Maximum SPL: 120 dB
• Power Requirements: 5-52 V phantom
• Connector: Shielded 3 terminating to a minature 3 pin XLRf
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
• Materials / Finish: Machined Brass Capsule / Black Finish
• Weight: 110 g / 4 oz
• Length: 25 mm / 0.98 in