Darkglass Electronics Microtubes X Mix Bass Guitar Effect Pedal Overview:

The Microtubes X multiband distortion engine brings into controls producers have been using for years in the studio, allowing you to separate and sculpt the portions of the spectrum that are distorted and remain untouched for ultimate flexibility.

Specifications:

• High-pass frequency:Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.
• Low-pass frequency:Controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.
• Level:Sets the overall output volume of the unit.
• Drive:Sets the amount of distortion for the high pass side.
• Mix:Sets the blend between low-pass and high-pass signals.
• Mids:Active mid control placed after the Mix control. +-12dB @ 500Hz.
• Output:Connect from the Output jack to the input of your amplifier or another effects pedal.
• Input:Connect your instrument or output from your pedal board to the mono jack.
• 9V DC:Only use a regulated 9V DC adapter with a center-negative plug.
• Dimensions
  • Width: 75 mm / 3
  • Length: 111 mm/ 4
  • Height: 43 mm / 1
  • Weight: 250 g / 0.55 lb