#Single

Mackie MR Series Powered Active Studio Monitor Speakers -Single

Designed for superior mix translation and accuracy for professional results in any studio

Features:

• Equipped with Mackies proven logarithmic waveguide design
• Ultra-wide dispersion for enhanced stereo imaging and listening sweet spot
• Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum
• 1 silk dome tweeter provides fast transient response for detailed high end and vocal clarity
• Optimize MR monitors for your mixing environment
• Adjustable acoustic space filters maintain flat response in typical placement configurations
• HF filter applies boost or cut to compensate for particularly dull or bright sounding rooms
• Professional all-wood cabinet design built to last and look great in any studio
• Custom designed internal bracing adds stiffness for reduced distortion and enhanced low-frequency response
• Flexible inputs for simple connection to almost any audio source
• Acoustically optimized with sound-tightening acoustic absorption material

MR524

• 5 polypropylene woofer delivers responsive, dynamic low-frequency response
• 50 watts of bi-amplified Class A/B amplification
• Frequency response: 45 Hz 20 kHz

MR624

• 6.5 polypropylene woofer delivers responsive, dynamic low-frequency response
• 65 watts of bi-amplified Class A/B amplification
• Frequency response:38 Hz 20 kHz

Specifications:
Acoustic Performance
Frequency Response (3 dB):

• 57 Hz 20 kHz [MR524]
• 45 Hz 20 kHz [MR624]

Frequency Response (10 dB):

• 45 Hz 20 kHz [MR524]
• 38 Hz 20 kHz [MR624]

Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input:

• 102 dB SPL @ 1m [MR524]
• 105 dB SPL @ 1m [MR624]

Maximum SPL Per Pair:

• 108 dB SPL @ 1m [MR524]
• 111 dB SPL @ 1m [MR624]

Transducers

• Low Frequency: 5.25 in / 133 mm polypropylene woofer [MR524]
• 6.5 in / 165 mm polypropylene woofer [MR624]
• High Frequency: Neodymium magnet driven, 1 in / 25 mm silk dome tweeter

Amplifiers
Low Frequency Power:

• 30 watts, 4 load, 60 watts peak [MR524]
• 40 watts, 4 load, 80 watts peak [MR624]
• 55 watts, 4 load, 110 watts peak [MR824]

High Frequency Power:

• 20 watts, 6 load, 40 watts peak [MR524]
• 25 watts, 6 load, 50 watts peak [MR624]
• 30 watts, 6 load, 60 watts peak [MR824]
• Type: Monolithic IC, Class AB with DMOS power stage

Electronic Crossover

• Crossover Type: 24 dB/octave
• Crossover Frequency:
• 2 kHz [MR524]
• 3 kHz [MR624]
• Sensitivity: +4 dBu at 300 Hz for full output
• Input Impedance: 20 k, balanced bridging; 10 k unbalanced
• Equalization: 2 dB @ 3 kHz and above [MR524 / 624]

ACPowerRequirements

• Power Requirements:
• ~120 V, 60 Hz
• ~220 V 240 V, 50/60 Hz
• ~100 V, 50/60 Hz

Note: MR monitors do not support multiple voltage configurations. Make sure the voltage rating for your particular model (as indicated on the rear panel near the IEC socket) corresponds with your local AC mains voltage.

• AC Connector: 3-pin IEC 250 VAC, 15 A male Fuse:
• 115 VAC: T 1 AL / 250 V
• 230 VAC: T 500 mAL / 250 V [MR524]
• 115 VAC: T 1.6 AL / 250 V
• 230 VAC: T 800 mAL / 250 V [MR624]

Power Consumption:

• 90 watts with music, loud mix
• 10 watts quiescent (idle) [MR524]
• 120 watts with music, loud mix 11 watts quiescent (idle) [MR624]

Physical Dimensions and Weight

MR524:

• Enclosure: 0.47 in / 12 mm thick MDF with 0.83 in / 21 mm MDF front panel
• Dimensions:
• Height: 11.1 in / 281 mm
• Width: 7.1 in / 180 mm
• Depth: 8.7 in / 221 mm
• Weight: 10.2 lb / 4.6 kg

MR624:

• Enclosure:0.47 in / 12 mm thick MDF with 0.94 in / 24 mm MDF front panel
• Dimensions:
• Height: 12.9 in / 328 mm
• Width: 8.3 in / 210 mm
• Depth: 11.2 in / 284 mm
• Weight: 16.5 lb / 7.5 kg

Made in China